POSITIVE:
Two lines are visible, and the line in test line region (T) is the same as or darker than the one in the control line region (C).
This indicates probable ovulation in 24-36 hours.
NEGATIVE:
Two lines are visible, but the line in the test line region (T) is lighter than the one in the control line region (C), or if there is no line in the test line region (T). This indicates that no LH surge has been detected.
INVALID:
Control line fails to appear. Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for control line failure. Review the procedure and repeat the test with a new test. If the problem persists, discontinue using the test kit immediately and contact your local distributor
LH-101-strip
| Detection Method | Chromatographic Immunoassay |
| Accuracy | >99% |
| Strip Storage temperature | 2-30℃ |
| Operating Temperature | 15-30℃(59 ℉ ~ 86℉) |
| Strip Width | 3mm |
| Measurement time | 5-10min |
| Sample addition time | 10-15s |
| Shelf Life | 24 months from the date of manufacture |
LH-102-cassette
| Detection Method | Chromatographic Immunoassay |
| Accuracy | >99% |
| Storage temperature | 2-30℃ |
| Operating Temperature | 15-30℃(59 ℉ ~ 86℉) |
| Measurement time | 5-10min |
| Sample addition time | 10-15s |
| Shelf Life | 24 months from the date of manufacture |
LH-103-Midstream
| Detection Method | Chromatographic Immunoassay |
| Accuracy | >99% |
| Storage temperature | 2-30℃ |
| Operating Temperature | 15-30℃(59 ℉ ~ 86℉) |
| Measurement time | 5-10min |
| Sample addition time | 10-15s |
| Shelf Life | 24 months from the date of manufacture |
By Eleanore from Cape Town - 2017.01.11 17:15
By Cheryl from Philippines - 2018.09.19 18:37
Linkedin: 
