For LH Midstream
|
Indicates a negative result with a low probability of conception. |
For Luteinizing Hormone (LH), when it detects the rise of LH for the first time, “+” will be displayed, which indicates a high probability of conception.Please test every 4-6 hours afterwards. |
For Luteinizing Hormone (LH), LH surge is detected. And you have the highest probability of conception. Please keep testing every 4-6 hours until it shows “+” , which indicates that you have ovulated. |
Troubleshooting
|
Symbol red” |
Problem |
Solution |
 |
The test midstream is not placed in a downward position, or the dipstick is not placed horizontally after urination. |
You should use a new dipstick to retest and follow the instructions.If the red “  “continues to flash, replace thebattery. |
| Use too much or too little urine. |
Remove the battery cover and test midstream cover.
Install the test mid stream.
Dip the top of the test midstream into the Urine or downward directly into your urine stream for at least 10-15 seconds,and hold it until you hear a “beep”
Place the product on a flat surface.
The LED light will be flashing during the testing
Read the results in 6-10 minutes
| Detection Project | LH/HCG/FSH | Service Life | 3 years (Battery excluded) |
| Use Environment | Indoor use | Battery | 1*CR2032 Battery |
| Operation Eondition | Temperature:10°C – 40°C; RH: ≤85%,;Pressure: 70-106kpa |
Storage Condition of Test Midstream | Temperature: 2°C – 30°C(36°F – 86°F) |
| Transport and Storage Condition | Temperature: -20°C – 55°C, RH: ≤95%, Pressure: 70-106kpa |
Shelf Life of Test Midstream: |
24 months |
| Detection Method | Chromatographic Immunoassay | Accuracy | LH 99.5%, FSH 99.5%, HCG 99.3% |
| Dimension | 127.5mm*26.3mm*15.5mm | Weight | 57g (Battery excluded) |
By Amber from Melbourne - 2017.02.18 15:54
By Sabrina from Estonia - 2018.03.03 13:09
Linkedin: 
